Our plastic nosecones are precision molded and are strong, smooth and allow easy finishing. Our plastic nose cones can be modified to house a variety of altimeters and data acquisition computers, eliminating the need for bulky conventional payload sections. The ample length shoulder provides additional space to house your electronics.
Part# Description Diameter Length Shoulder Wt/OZ
NC-1.1-CON 29mm Conical 1.145 6.00" 1.50" 2.2
NC-1.5-CON 38mm Conical 1.525 8.00" 1.50" 4.3
NC-1.52 38mm Nosecone 1.5 10.0" 2.00" 3.5
NC-2.14 54mm Nosecone 2.25 9.50" 1.75" 3.5
NC-2.56 2.56 Nosecone 2.560 11.25" 2.00" 5.4
NC-3.0 75mm Nosecone 3.000 13.25" 2.50" 5.6
NC-3.9 98mm Nosecone 3.900 16.75" 3.00" 10.0
NC-5.5S 5.5 Nosecone 5.380 17.0” 4.00” 10.0
NC-5.5L 5.5 Nosecone 5.380 26.0” 5.00" 22.0
NC-7.5 7.5 Nosecone 7.510 27.0" 5.00" 32.0
NC-7.5TC 7.5 Tailcone 7.51 5.00"
AIRFRAME REDUCERS
3.0″ to 2.14” (54mm) Airframe Reducer/Tail Cone is 8″ long with a taper angle of 8%, a taper length of 3.12″,and a weight of 4 oz.
3.90″ to 3.0″ Airframe Reducer/Tail Cone. This reducer is 8.75″ long with a taper angle of 10 Degrees, a taper length of 2.5″, and a weight of 6oz.
Each end has a cut-out for a 29mm, 38mm, or 54mm Motor Mount Tube pass-through. This can eliminate the need for additional centering rings.
Use these for an inverted payload section, boat tail, or to transition between two different size airframes.